Description
JACO P-P-4 Polypropylene Tube Insert For 1/4″ OD Tubing
Jaco P-P-4 Polypropylene Tube Insert Fittings are used in soft or thin wall tubing. The inserts will not wear a hole in the tubing, and provide a grip to prevent sliding due to heat expansion. Polypropylene inserts eliminate the need for special high temperature inserts.
Specifications:
- Tubing Size: 1/4″ OD
- Inner Diameter of Fitting: 1/8″
- Length of Fitting: 3/8″
Advantages of JACO fittings over metal compression fittings:
- Good electrical insulating qualities. This eliminates the electrolytic action that corrodes tubing, caused by a dissimilar metal meeting a fitting.
- Low density and softness of plastic gives JACO fittings the ability to absorb mechanical and acoustical vibrations.
- Low resistance to flow due to the smooth internal surface of the fittings.
- Resistance to scale buildup.
| Jaco Part Numbers |
Tube Size (O.D.) |
A | B | C | D | E |
| P-P-4 | 1/4 | 3/8 | .240 – .250 | .199 | 1/8 | .167 |
| P-P-5 | 5/16 | 13/32 | .300 – .312 | .217 | 9/64 | .180 |
| P-P-6 | 3/8 | 1/2 | .360 – .370 | .245 – .250 | .200 | .235 |
| P-P-8 | 1/2 | 9/16 | .475 – .490 | .370 – .375 | .300 | .350 |
| All Measurements listed above are in Inches | ||||||
